camera setup
USING THE CAMERA MENU
Follow the steps below if you run the Web Viewer for setting the menus.
1. Launch the Web Viewer.
2. Click [Camera Menu (
corner of the Live screen.
The camera setup menu appears.
3. Use the Up/Down (▲/▼) buttons to move
to a desired item.
4. Click [Enter (
down (▲/▼) button to move to a desired
item.
5. To access a sub menu item, click
[Enter (
6. To move to previous menu or exit the menu setup, click [Cancel (
: This arrow appears next to a menu that contains sub items.
J
If <IV analysis function> is enabled, camera's OSD menu operation can be set as an event.
CAMERA SETTING
You can set up the general functions of camera module.
Starting the Menu
1. Click [Camera Menu (
2. When main menu shows up on screen,
move to desired menu by using direction
button.
)] in the left
)]. Then, use the up/
)].
)] button.
Main Menu
Main Menu
Camera Setting
Camera Setting
P/T Setting
P/T Setting
OSD Setting
OSD Setting
Initialize
Initialize
)] button.
English _67