Embroidery Edit; Rotate; Design Height; Design Width - Pfaff creative 1.5 Owner's Manual

Embroidery Edit

To adjust your design, press the embroidery edit button.
When you press the stitch-out button, the machine will
switch to embroidery stitch-out.
Note: When you press the start/stop button or foot control,
machine will automatically change to embroidery stitch out
view and start stitching.

Rotate

You can rotate the design around its center point. Use
the - and + buttons just to the right of the rotate icon to
rotate. Each time you press the + button, the design will
rotate 90 degrees clockwise. Press the - button to rotate
the design counterclockwise. To the left of the rotate
icon on the screen you can see how many degrees the
design has rotated from its original position.
Note: Some designs are too large to rotate in 90 degree
increments. Each press of the button will then rotate 180
degrees. The P icon will rotate according to this setting,
indicating the current orientation of the design in the
embroidery area.

Design Height

You can increase or decrease the design height up to
20%. Use the + and - buttons just to the right of the
design height icon. The design height is scaled 5% for
each press.

Design Width

You can increase or decrease the design width up to
20%. Use the + and - buttons. The design width is scaled
5% each time you press a button.

Move

Use the wheel to move the design anywhere in the
embroidery field. In the design information view you
can see how far the design has been moved from its
original position. Press the OK button to center the
design in the hoop.
1. Rotate
2. Design height
3. Design width
55