Table of Contents
Advertisement
4.1.4. WAN2 & Failover
Except select None to disable this function, there are 2 connection types for the WAN2 port: Static IP Address and
Dynamic IP Address. And you can enter up to three URLs and check "Warning of Internet Disconnection" to
work with the WAN Failover function. When Warning of Internet Disconnection is enabled, the system will check
the three URLs to detect the WAN ports connection status.
None: The WAN2 Port is disabled. You can still enter up to three URLs and check "Warning of Internet
Disconnection" to detect the WAN1 port connection status.
Static IP Address: Specify the IP Address, Subnet Mask, Preferred DNS Server, and Default Gateway of WAN2
Port, which should be applicable for the network environment. You can enter up to three URLs and check
"Warning of Internet Disconnection" to work with the WAN Failover function.
26
Advertisement
Table of Contents
