Table of Contents
Advertisement
4.5.3. Firmware Upgrade
The administrator can download the latest firmware from website and upgrade the system here. Click Browse to
search for the firmware file and click Apply to go on with the firmware upgrade process. It might be a few minutes
before the upgrade process completes and the system needs to be restarted afterwards to make the new firmware
effective.
Warning: 1. Firmware upgrade may cause the loss of some of the data. Please refer to the release notes for the
limitation before upgrading the firmware. 2. Please restart the system after upgrading the firmware. Do
not power on/off the system during the upgrade or the restart process. It may damage the system and
cause it to malfunction.
4.5.4. Restart
This function allows the administrator to safely restart AMG-2000 and the process should take about 100 seconds.
Click YES to restart AMG-2000; click NO to go back to the previous screen. If you need to turn off the power, we
recommend you to restart AMG-2000 first and then turn off the power after completing the restart process.
Caution: The connection of all online users of the system will be disconnected when system is in the process of
restarting.
114
Advertisement
Table of Contents
