Toshiba e-Studio 2500c Operator's Manual page 94

2 HOW TO MAKE COPIES
Recalling dimensions registered in the memory
Press the desired memory number button from [MEMORY 1] to [MEMORY 4] to recall
the dimension data registered previously, and then press the [ENTER] button.
Set other copy modes as required.
Paper size that can be set is as follows:
Length:
Width:
To register the dimension data in the memory, see
dard size in the memory".
5
Press the [START] button on the control panel.
92 Bypass Copying
100 mm (3.94") to 297 mm (11.69")
148 mm (5.83") to 432 mm (17.01")
P.93 "Registering non-stan-