Toshiba e-Studio 2500c Operator's Manual page 336

9 BLINKING GRAPHIC SYMBOLS
6
Remove any misfed paper
from the receiving tray or the
Bridge Unit (optional).
7
Close the cover of the Bridge
Unit (optional). Skip this step if
the Finisher (optional) is not
installed.
If no misfed paper can be found on the
exit side, perform step 8.
8
Rotate the green dial upward
as indicated by the arrow to
move the paper down.
9
Holding the green knob, close
the transport guide.
10
Close the jam releasing cover and the Automatic duplexing unit. Be
sure to close both sides of the Automatic duplexing unit.
334 Jam Symbols