During Printing From The Fax Or Printer (Using A Drawer) - Toshiba e-Studio 2500c Operator's Manual

10 WHEN THIS MESSAGE APPEARS
5
Place paper on the bypass tray and select the paper size.
P.83 "Bypass Copying"
6
Place the original and try to copy again.
When "POWER FAILURE" appears, press the [FUNCTION CLEAR] button twice to clear
the message. See

During printing from the FAX or Printer (using a drawer)

1
Turn the power of the equip-
ment OFF.
You cannot shut down the equipment.
2
Remove the jammed paper.
P.325 "Jam Symbols"
3
Pull out the drawer mentioned
in the message. Then remove
all the paper in it.
4
Close the drawer and then turn
the power ON.
378 "Check paper size setting on control panel for drawer N"
P.372 ""POWER FAILURE"" for details.