8
Media
54
8.3
Refl ex Mark Dimensions
Fig. 19
Refl ex mark dimensions
Dim.
Designation
H
Print zone height
A
Print zone distance
V
Feed length
L
Width of refl ex mark
M
Height of refl ex mark
X
Distance mark - middle of media track
= Distance gap/refl ective sensor - middle of media track
Y
Sensor recognized virtual print zone front edge
•
•
•
•
Table 10 Refl ex mark dimensions
Refl ex marks must be on the back side of the material (liner).
Material sensor for refl ex marks on the top side on request.
Specifi cation is valid for black marks.
Recognition of colored marks may fail.
Preliminary tests are needed.
Dim. in mm
5 - 1000
> 2
> 7
> 5
3 - 10
-53 - ±0
Front edge of mark