Table of Contents
Advertisement
VULCAN RGT-10 GAS CONVECTION OVEN
INSTALLATION, SERVICE & PARTS MANUAL - INDEX
Your Vulcan RGT-10 Gas Convention Oven is the finest
made. Proper use and maintenance will result in many
years of satisfactory performance.
DESCRIPTION
DEFINITIONS
INDEX
SECTION I (INSTALLATION)
SECTION II (SERVICING)
GENERAL THEORY OF OPERATION
SECTION III PARTS
REVISION PAGE
RGT-10 units are supplied with a 7 foot 3 wire supply
cord. Appliances are equipped with a three prong
(grounded) plug for your protection against shock hazard
and should be plugged directly into a properly grounded
three prong receptacle. DO NOT cut or remove the
grounding prong from this plug.
For installation on combustible floors with minimum
clearances from combustible construction, 0 in. at the
sides and 6 in. at the rear.
We suggest that you carefully read this entire manual and
carefully follow all of the instructions.
A rating plate is located on the lower panel stating the
model number, type gas, serial number, voltage and
amperage.
A wiring decal is also located on the lower front panel.
Motor blowers in the RGT-10 units are permanently
lubricated and require no additional lubricating main-
tenance.
PAGE
(Inside Front Cover)
1
2
3-4
5
6-10
10-11
12-13
14-24
(Inside Back Cover)
2
- Quick Links:
- Installation Instructions
- Parts List
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
