4.2
Replacing the
Chain Catcher
4
– Remove chain sprocket cover -
see
4.1.
Take out screw (1) and remove
the inner side plate (2).
Take out screw (3) and remove
the chain catcher (4).
Reassemble in the reverse
sequence.
034, 036, 036 QS
4.3
Clutch
Troubleshooting chart - see
"Standard Repairs, Trouble-
shooting" handbook.
2
– Remove clutch drum/chain
sprocket -
see
4.1.
1
3
Release twist lock (1) on
carburetor box cover (2) and lift
cover off vertically.
Note:
When reassembling, check
correct position of groove and
guide.
1
Unscrew the slotted nut (1).
– Pull boot off the spark plug.
Remove the shroud (2).
1
1
2
2
On powerheads with a
decompression valve (1), remove
the cover and unscrew the
decompression valve.
Unscrew the spark plug (2).
1
Push the locking strip (1)
0000 893 5903 into the cylinder
so that the words "OBEN - TOP"
face upward.
2
9