Checking Play - Stihl 034 Series User Manual

1
Use the assembly tool
1117 890 0900 to attach the
brake spring (1) to the anchor pin.
– Fit cover over the chain brake -
see 4.5.1.
– Fit inner side plate - see
– Install the clutch drum/chain
sprocket - see 4.1.
– Fit the cutting attachment and
chain sprocket cover -
034, 036, 036 QS
4.5.3

Checking Play

– Pull hand guard toward front
handle.
– Unscrew nut from chain sprocket
cover and remove the cover -
4.1.
– Remove the cutting attachment -
see 4.1.
4.5.1.
3
see 4.1.
Take out screw (1) and remove
the side plate (2).
Take out screws (3) and remove
the cover (4).
The brake cable (1) must hang
loosely in the crankcase when
the brake is disengaged.
see
Press down interlock lever (1) all
4
3
1
2
3
The brake band (1) must locate
1
Let go of the interlock lever (1).
Check free travel by slowly
1
the way and hold it in that
position.
A
A
A
A
A
without any play against the
points (A) in the crankcase.
1
B
squeezing the interlock lever (1).
Play must be within the mark (B)
at the front end of the interlock
lever.
1
A
15