Basket Guard Sk 400; Protective Dust Cover Ssk 400; Detector Console Mk 400; Detector Heating Element Mh 400 - Bosch MAGIC.SENS series Product Manual

Product Information MAGIC.SENS -- Product range

7.2. Basket Guard SK 400

The basket guard SK 400 is installed over the
detector and protects the detector against
damage to the greatest possible extent.
If the detector is mounted in a sports facility, for
example, the basket guard prevents balls or
other sports equipment from hitting the detector
and damaging it.

7.3. Protective dust cover SSK 400

The protective dust cover SSK 400 is necessary
during construction work to protect an installed
detector base, with or without detector head,
from contamination. The protective dust cover
made of polypropylene (PP) is pushed onto the
installed detector base.

7.4. Detector console MK 400

The detector console MK 400 is used for the
DIBt--conforming installation of detectors above
frame sets, etc. The console is delivered with a
pre--installed base.

7.5. Detector Heating Element MH 400

The detector heating element MH 400 is required if the detector is used in an
environment where water condensation can occur, such as in a warehouse that must
be opened briefly for delivery vehicles.
The detector heating element is connected to the terminals + V / 0V in the detector base.
Operating voltage: 24V DC, resistance: 1kΩ, power consumption: 3W.
The heating is supplied with power either by the fed--through supply voltage via the
central unit or by a separate power supply.
With supply via the central unit, the number of detector heating elements depends on
the cable diameter and line length used.
Page 26 of 42
PI -- 34.65d
BDL- -4998121218
A23.en /09.02.2007
ST- -FIR/ PRM1 / deh