Line Keys - Alcatel-Lucent 8001 User Manual

Audio Codec
Jitter Buffer
Type
Min Delay
Max Delay
Normal Delay
Other
Payload Length
High Rate Of G723.1
VAD
Echo Suppression Mode Enable/Disable Echo Suppression Mode feature.
Side Tone

6.3 Line Keys

ITEMS DESCRIBES
Line Line is the default value.
Speed Dial You can use this key feature to speed up dialing the numbers that are often
used or hard to remember.
Speed Dial Prefix You can use this key feature to speed up dialing a specific prefix number.
DTMF You can use this key feature to send arbitrary key sequences via DTMF.
BLF You can use the BLF (Busy Line Field) feature to monitor a specific user for
status changes on the phone.
Alcatel-Lucent 8001 DeskPhone 8AL90895USAAed01
Alcatel-Lucent proprietary and confidential. Copyright © 2014. All rights reserved.
Page 37 of 50
and the total size must be less than 150k.
Use the navigation keys to highlight the desired one in the Enabled/Disable
Codes list, and press the
The type of Jitter Buffer is Adaptive or Fixed, default is adaptive.
The min delay range setting, default is 60.
The max delay range setting, default is 150.
The normal delay range setting, default is 120.
The payload length setting, default is 30ms.
Enable/Disable High Rate of G723.1 feature.
Enable/Disable VAD feature.
Enable/Disable Side Tone feature.
/ to move to the other list.