Line Keys - Alcatel-Lucent 8001 User Manual

Other
Payload Length
High Rate Of G723.1
VAD
Echo Suppression
Mode
Side Tone

6.3 Line Keys

ITEMS
Line Line is the default value.
Speed Dial You can use this key feature to speed up dialing the numbers that are
often used or hard to remember.
Speed Dial Prefix You can use this key feature to speed up dialing a specific prefix number.
DTMF You can use this key feature to send arbitrary key sequences via DTMF.
BLF You can use the BLF (Busy Line Field) feature to monitor a specific user for
status changes on the phone.
Paging You can use multicast paging to forward time sensitive announcements
out to people within the multicast group.
Call Park You can use call park feature to place a call on hold, and then retrieve the
call from another phone in the system (for example, a phone in another
office or conference room).
Intercom You can press the configured intercom key to automatically connect with a
remote extension for outgoing intercom calls, and the remote extension
will automatically answer the incoming intercom calls
BLA Bridge Line Appearance (BLA), also named Shared Line Appearance (SLA)
With this BLA configuration, the 8001 DeskPhone set monitors a shared
line status.
Alcatel-Lucent 8001 DeskPhone
ALE International proprietary and confidential. Copyright © 2016. All rights reserved.
Page 37 of 49
The payload length setting, default is 30ms.
Enable/Disable High Rate of G723.1 feature.
Enable/Disable VAD feature.
Enable/Disable Echo Suppression Mode feature.
Enable/Disable Side Tone feature.
DESCRIBES