Alcatel-Lucent 8001 User Manual page 5

 1* Handset Cord
 1* Ethernet Cable
 1* Phone Bracket
 1* Safety sheet
b) Phone Installation:
This section introduces how to install the phone with the components available in the pack:
 Attach the Bracket
 Connect the Handset and optional Headset
 Connect the Network and Power
Attach the Bracket
Please firstly let the part 1 of the bracket join the phone by following steps "a" to "b" as shown
here-after, and then let the part 2 of the bracket join the lower holder or upper holder
depending on the desired phone angle: respectively high or low.
Connect the Handset and optional Headset
Connect the Network and Power
You have two options for power supply. Your system administrator will advise you which one to
use.


Alcatel-Lucent 8001 DeskPhone 8AL90895USAAed01
Alcatel-Lucent proprietary and confidential. Copyright © 2014. All rights reserved.
Page 5 of 50
AC power adapter
POE(Power over Ethernet) IEEE802.3af