Introduction; Punch Amplifier Accessory Pack - Rockford Fosgate punch 200 Operation & Installation

I
N T R O D U C T I O N
Rockford engineers designed the Punch multi-channel amplifiers to with-
stand the rugged automotive environment while delivering superior sound
quality in a flexible, reliable, and efficient package. TRANS• ana is a low
voltage circuit in the preamp stage of all Punch multi-channel amplifiers that
lets the music sound crystal clear and very real, even when played at high
volume levels. This is matched with TOPAZ, a unique grounding circuit used
to eliminate noise problems associated with car audio systems and their
installation. Flexibility is accomplished with the use of high-level inputs and
a built-in crossover. The use of a protection circuit called NOMAD, along with
MOSFET and DSM (Discrete Surface Mount) and our innovative MEHSA heat
dissipating technology improves amplifier efficiency. The result of these
components give the Punch amplifier awesome sound quality in a "Bullet
Proof" package.
P A
UNCH MPLIFIER
The accessory pack shipped with the Punch multi-channel amplifiers includes
the mounting hardware necessary to secure the amp to the vehicle.
Installation & Operation Manual
Punch Verification Certificate
(4) Amplifier mounting screws (#8 x 3/4" Phillips)
(4) Speaker/Power connector set screws (3/32" Allen)
(4) Endbell mounting screws (9/64" Allen)
(1) Allen wrench (3/32")
(1) Allen wrench (9/64")
(2) High Level Input harness (Punch 200/400/600/800 4-channel)
- Replacement part #CC-1992 - 4 position molex
(1) High Level Input harness (Punch 600 5-channel)
- Replacement part #CC-2347 - 8 pin mini-DIN
(1) Inline fuseholder (except Punch 800 4-channel)
(1) ATC 30 amp fuse (Punch 200 4-channel)
(1) ATC 50 amp fuse (Punch 400/600 4-channel & Punch 600 5-channel)
NOTE: Refer to the specifications section for recommended fuse size on the
Punch 800 4-channel amplifier.
A
CCESSORY
– 1 –
P
ACK