Introduction; Amplifier Accessory Pack - Rockford Fosgate POWER 150 Operation & Installation

I
N T R O D U C T I O N
Rockford engineers designed the Power 150 and Power 200 amplifiers to
withstand the rugged automotive environment while delivering superior
sound quality in a flexible, reliable, and efficient package. TRANS• ana is a
low voltage circuit in the preamp stage lets the music sound crystal clear and
very real, even when played at high volume levels. This is matched with
TOPAZ, a unique grounding circuit used to eliminate noise problems
associated with car audio systems and their installation. Flexibility is
accomplished with the use of a built-in variable crossover. The use of a
protection circuit called NOMAD, along with MOSFET and DSM (Discrete
Surface Mount) technologies improve amplifier efficiency. The result of these
components give the Power amplifier awesome sound quality in a "Bullet
Proof" package. Explanations of these technologies, most of which are
exclusively designed and patented by Rockford, are described in the
Technical Design Features.
A
MPLIFIER
The accessory pack included with each amplifier contains the mounting
hardware necessary to secure the amp to the vehicle and to attach the end
caps to the amplifier.
Installation & Operation Manual
Punch Verification Certificate
(4) Amplifier mounting screws (#8 x 3/4" Phillips)
(4) Speaker/Power Connector Set Screws (3/32" Allen)
(4) Endbell Mounting Screws (9/64" Allen)
(1) Allen Wrench 9/64"
(1) Allen Wrench 3/32"
(1) High Level Input Harness (replacement part #CC-1992)
(1) ATC Inline Fuseholder
(1) ATC 15 Amp Fuse (Power 150)
(1) ATC 20 Amp Fuse (Power 200)
A
CCESSORY
P
ACK
– 1 –