Only For Training And Service Purposes - LG TU550 Service Manual

The Camera module is connected to main board with 24pin Board to Board connector (AXK7L24227).
Its interface is dedicated camera interface port in MSM6275. The camera port supply 12MHz master
clock to camera module and receive 36MHz pixel clock (11.25fps), vertical sync signal, horizontal sync
signal, reset signal and 8bits data from camera module. The camera module is controlled by I2C port
from MSM6275.
No Name
1 GND
2 CAM_PWDN
3 CAM_MCLK
4 CAM_DATA(3)
5 CAM_DATA(0)
6 CAM_PCLK
7 CAM_DATA(2)
8 CAM_DATA(1)
9 CAM_VSYNC
10 CAM_DATA(5)
11 CAM_DATA(4)
12 VREG_CAM_1.8V
13 GND
14 GND
15 VREG_CAM_2.7V
16 GND
17 I2C_SCL
18 CAM_RESET_N
19 VREG_MSMP_2.7V
20 CAM_HSYNC
21 I2C_SDA
22 CAM_DATA(6)
23 CAM_DATA(7)
24 GND
Table. Interface between Camera Module and Main Board (in camera module)
Copyright © 2007 LG Electronics. Inc. All right reserved.

Only for training and service purposes

Port Note
GND GND
I Camera power down
I Master Clock(12M)
O Data
O Data
O Clock for Camera Data Out(36M)
O Data
O Data
O Vertical Synch
O Data
O Data
I Camera Digital Power
GND GND
GND GND
I Camera Analog Power
GND GND
I I2C Clock
I Camera reset signal
I Camera I/O Power
O Horizontal Sync
I/O I2C command
O Data
O Data
GND GND
- 55 -
3. TECHNICAL BRIEF
LGE Internal Use Only