LG TU550 Service Manual page 153

9. CALIBRATION
9.1.2 Setup file (Info_Db.txt)
2 3
1
/*cal*/[Default]=[TU55 0]
/*cal*/[TU550 ]=[..\\Cal_Model\\CU500\\Jay_Ver0.8A_TU550.dll]
4
/*auto*/[TU550 ]=[..\\RF Auto\\Rf_AutoMain_Ver1114.dll]
5
[ezlooks]=[off]
[batcal]=[off]
[svc]=[off]
[standalone]=[off]
[tescom]=[off]
6
7
[process]=[cal]
[TU550 ]=[..\\Auto_Model\\TU550 \\Procedure_TU550_Ver0.99.xml,..\\Auto_Model\\TU550 \\Spec_
TU550 _Ver0.95.xml,..\\Auto_Model\\TU550 \\AutoSetup.xml]
1: Indication of 'cal process' or 'auto process'
2: Model name which is displayed on Hot Kimchi program
3: Relative path of Main Sequence dll file from Hot_KimchiD.exe
4: You can change this as 'on' or 'off'(should be in lower case; on, off)
5: You can change this as 'auto' or 'cal'(should be in lower case; on, off)
6: Auto model name
7: Relative path of auto model procedure, spec, setting file from Hot_KimchiD.exe
LGE Internal Use Only Copyright © 2007 LG Electronics. Inc. All right reserved.
- 154 -
Only for training and service purposes