Lowrance EP-60R Fuel Flow Installation/Configuration Instructions page 24

flow to free up its configuration name. If all three fuel flows are
configured, which means there is no configuration name available,
follow the first set of instructions. If the desired configuration name is
available, follow the second set of instructions.
Change Engine (active only with multiple-engine setting)
The steps below show how to switch the configuration name of a fuel
flow from Port engine to Starboard engine.
If all fuel flows configured (Configuration name unavailable):
1. Press
MENU
press .
ENTER
2. Highlight
B
appear.
3. Select the Port fuel flow and press
press . The following message will appear: Press Enter to
ENTER
UnConfig Device Name.
4. Press
ENTER
the Port fuel flow will now be displayed as UnCfg FFlow.
5. Select the Starboard fuel flow and press
6. Highlight
C
will appear.
7. Select
P
ORT
Devices list.
8. Highlight UnCfg FFlow and press
appear: Press Enter to Configure Fuel Flow Sns.
9. Press
ENTER
Starboard and press
list where both fuel flows will be shown with their new configuration
names.
If desired configuration name available:
1. Press
MENU
press .
ENTER
2. Highlight
B
appear.
3. Select the fuel flow you want to reconfigure and press
Highlight
C
HANGE
appear.
4. Choose the desired configuration name and press
taken back to the Bus Devices list, where the fuel flow you reconfigured
will be displayed with its new configuration name.
, use the
UP
and press
D
US EVICES
. You will be taken back to the Bus Devices list, where
and press
E
HANGE NGINE
and press
ENTER
, which will open the Select Engine menu. Choose
. You will be taken back to the Bus Devices
ENTER
, use the
UP
and press
D
US EVICES
and press
E
NGINE
and keys to select
DOWN
ENTER
ENTER
ENTER
. You will be taken back to the Bus
ENTER
and keys to select
DOWN
ENTER
. The Select Engine menu will
ENTER
24
S
YSTEM
. The Bus Devices list will
. Highlight
U
.
ENTER
. The Select Engine menu
. The following message will
S
YSTEM
. The Bus Devices list will
ENTER
and
S
ETUP
and
E
NSET NGINE
and
S
ETUP
ENTER
. You will be
.