Setting User Authentication - Muratec MFX-3510 Administrator's Manual

Setting user authentication

You can set authentication for the users to restrict use of the device.
There are two types of authentication methods.
Authentication method
Stand-Alone
Single Sign On
NOTE
• When the number of registered users exceeds the limit of 100 users, the users will
not be registered and will log in as guest, even when "Single Sign On" is set.
• For details on the user information that is automatically registered or overwritten
when "Single Sign On" is set, see chapter 4, "Setting the machine policy" in "Setting
security" in the OfficeBridge Guide.
• To set "Single Sign On" for the authentication method, it is necessary to register a
domain name in advance. Register the domain name from the OfficeBridge screen.
For details, see chapter 4, "Setting the machine policy" in "Setting security" in the
OfficeBridge Guide.
1
Press <Menu>.
2
Press [Setting].
3
Select "Management", and press [Enter].
4
If an administrator password is set, enter the password and press [Enter].
If an administrator password is not set, proceed to step 5.
5
Select "Network Settings", and press [Enter].
6
Select "AuthenticationMethod", and press [Enter].
7
Select the authentication method, and press [Enter].
2-18 Specifying the network settings
The machine authorizes users using the user information in the machine.
User information must be registered in OfficeBridge in advance.
The machine authorizes users using the user information in the machine
when the users are authorized by Active Directory.
If the corresponding user information is not registered in OfficeBridge,
the user will automatically be newly registered. If the corresponding
user information is already registered, the information will be
overwritten with the information registered in Active Directory.
Description