Searching - Lowrance iFINDER H2O C Operation Instructions Manual

4. To accept the default name Data for the GPS Data File, press ↓ to
| . If you wish to rename the file, press
S ENT
AVE
lection box. Press ↑ or ↓ to change the first character, then press → to
the next character and repeat until the name is correct. Then press
|↓ to
ENT S
AVE
The unit will display a completion message when the data transfer is
finished. To return to the main page display, press

Searching

In this example, we'll look for the nearest hotel or motel. For more in-
formation on different types of searches, refer to Sec. 6, Searching.
NOTE:
This example requires the Point of Interest (POI) database included
with MapCreate 6.
After the iFINDER has acquired a position:
1. Press |↓ to
FIND
2. You could search the entire lodging category, but in this example we
will narrow our search. Press → to
3. The iFINDER says it is calculating, then a list of hotels and motels
appears, with the closest location at the top of the list and the location
furthest from you at the bottom of the list. The nearest is highlighted.
Find Map Places Menu (left); Category Selection menu (center) and list
4. If you wanted, you could scroll ↑ or ↓ here to select another motel or
hotel, but for now we will just accept the nearest one. Press
5. The POI information screen appears. (This is how you can use the
iFINDER as a business phone directory!) If you wanted to navigate
there, you could press Enter, since the
We just want to see it on the map, so press → to
| .
ENT
M P
AP LACES
of the nearest motels (right).
| |↓ to
ENT POI-L
H /M
OTELS
G
O
56
to activate the se-
ENT
repeatedly.
EXIT
.
ODGING
| |
ENT ENT
OTELS
command is highlighted.
T
O
F O M
IND N
.
.
ENT
| .
ENT
AP