Find Distance From Point To Point; Find Your Current Position - Lowrance iFINDER H2O C Operation Instructions Manual

The distance to Dallas from the starting point is 211.1 miles.

Find Distance from Point to Point

You can also measure distance between two other points on the map.
1. While on the Map page press
2. Center your cursor over the first position. (A rubber band line ap-
pears, connecting your current position to the cursor's location.) Press
to set the first point and the rubber band line disappears.
ENT
3. Move the cursor to the second position. The rubber band line reap-
pears, connecting the first point you set to the cursor. The distance
along that line will appear in the lower right-hand corner of the screen.
4. Press to clear the command and return to the page screen.
EXIT

Find Your Current Position

Finding your current position is as simple as turning on the iFINDER.
Under clear sky conditions, the unit automatically searches for satel-
lites and calculates its position in approximately one minute or less.
NOTE:
Clear sky means open sky, unobstructed by terrain, dense foliage or
structures. Clouds do not restrict GPS signal reception.
If for some reason satellite acquisition takes longer, you may be inside
a structure or vehicle or in terrain that is blocking signal reception. To
correct this, be sure you are positioned so the unit has as clear a view of
the sky as possible, then turn the unit off and back on again.
If the cursor is activated, any information the unit gives you will be
based on the cursor position, not your own. If you want to find where
you are, just press
back to your position.
MENU
until the cursor goes away and the map snaps
EXIT
|↓ to
F D
IND
48
| .
ENT
ISTANCE