Sound Adjustments; Adjusting The Sound; Turning On/Off The Loudness Function; Using The Sound Control Memory (Scm) - JVC KD-S700 Instructions For Use & Installation

SOUND ADJUSTMENTS

Adjusting the sound

You can adjust the sound characteristics to your
preference.
1
Select the item you want to adjust.
Each time you press the button, the
adjustable items change as follows:
BAS
(bass)
VOL
(volume)
Indication To do:
BAS Adjust the bass.
(Bass)
TRE Adjust the treble.
(Treble)
FAD* Adjust the front
(Fader)*
and rear speaker
balance.
BAL Adjust the left
(Balance)
and right speaker
balance.
VOL Adjust the volume.
(Volume)
Note:
* If you are using a two-speaker system, set the fader
level to "00."
2
Adjust the level.
Equalization pattern changes as you
adjust the bass or treble.
Note:
Normally the control dial works as the volume control.
So you do not have to select "VOL" to adjust the
volume level.
14
TRE FAD
(treble) (fader)
BAL
(balance)
Range
–06 (min.)
|
+06 (max.)
–06 (min.)
|
+06 (max.)
R06 (Rear only)
|
F06 (Front only)
L06 (Left only)
|
R06 (Right only)
00 (min.)
|
50 (max.)
To increase the level.
To decrease the level.
Turning on/off the loudness
function
The human ear is less sensitive to low and high
frequencies at low volumes.
The loudness function can boost these frequencies
to produce well-balanced sound at low volume level.
Each time you press LOUD, the loudness function
turns on and off alternatively.
Using the Sound Control
Memory (SCM)
You can select and store a preset sound
adjustment suitable to each playback source.
(Advanced SCM)
Selecting and storing the sound modes
Once you select a sound mode, it is stored in
memory. It will be recalled every time you select
the same source and will be shown on the display.
A sound mode can be stored each of the following
sources — FM1, FM2, FM3, AM and CD.
• If you do not want to store the sound mode
separately for each playback source, but want to
use the same sound mode for all the sources,
see " To Cancel Advanced SCM" on page 18.
Select the sound mode you want.
Each time you press the button, the
sound mode changes as follows:
SCM OFF
Loud indicator
BEAT SOFT POP