Lowrance LMS-332C Installation And Operation Instructions Manual page 129

To create and save a Waypoint:
These first two techniques use the Quick Save method, the fastest and
easiest way to create a waypoint.
Create Waypoint at Current Position
While you are traveling, press
automatically given a name with a sequential number, such as "way-
point 003." The waypoint symbol and number appear on the map.
Sequence for setting a waypoint. Step 1: while traveling, press WPT
twice to call up the Find Waypoint screen (seen in Step 2) and set a
waypoint. Step 3: a message says the waypoint has been saved. Step 4:
vehicle continues on its way; waypoint number and symbol are visible
NOTE:
The Quick Save method uses the default waypoint symbol until you
edit an existing waypoint and change its symbol. (Edit Waypoint
Symbol is described in Sec. 7.) After you have changed a waypoint
Step 1.
Step 3.
| . The waypoint is saved and
WPT WPT
on map.
121
Step 2.
Step 4.