Muratec MFX-3530 Administrator's Manual page 69

Item
Attribute Setting
Name 1
Name 2
e-mail Address 1
e-mail Address 2
Fax Number 1
Fax Number 2
Telphone Number 1
Telphone Number 2
Company Name 1
Company Name 2
„ Setting the primary LDAP server
You can set the LDAP server to use for LDAP searching from the registered LDAP
servers.
Make sure to register at least one LDAP server in advance.
1
Press [Setting] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until My MFP Menu
screen is displayed.
2
Press [Management].
If an administrator password is set, enter the password and press [Enter].
3
Press [Network Settings].
4
Press [LDAP Server Setting].
5
Press [Default Server].
2-24 Specifying the network settings
Set the name attribute. Up to 49 characters can be entered,
and the default value is "cn".
Set the name attribute. Up to 49 characters can be entered,
and the default value is "commonname".
Set the e-mail address attribute. Up to 49 characters can be
entered, and the default value is "mail".
Set the e-mail address attribute. Up to 49 characters can be
entered.
Set the fax number attribute. Up to 49 characters can be
entered, and the default value is "facsimileTelephoneNumber".
Set the fax number attribute. Up to 49 characters can be
entered.
Set the phone number attribute. Up to 49 characters can be
entered, and the default value is "telephoneNumber".
Set the phone number attribute. Up to 49 characters can be
entered.
Set the company name attribute. Up to 49 characters can be
entered, and the default value is "company".
Set the company name attribute. Up to 49 characters can be
entered, and the default value is "o".
Description