Muratec MFX-3530 Administrator's Manual page 49

Function
Initialize all
data
PIN Mode
Admin
Password
Protect
Passcode
Automatic
LogoutTime
NOTE
Underlined values are the default settings specified at the time of shipment.
2-4 Machine management settings
Description
You can erase the data set in the
[Setting] mode, such as the address
book and copy/fax function settings,
and the data saved in the machine,
such as the stored documents.
When this operation is done, the
machine reboots from itself.
Data that has been cleared cannot
be restored.
The entered PIN (personal
identification number) will not
appear in the journal, error message
printout, delayed command list or
transmission report.
You can set the administrator
password.
You can set an administrator
password to prevent users other
than the administrator from editing
the settings in the [Management]
screen.
You can set the protect passcode.
A protect passcode is required when
using function protect settings.
You can set the time how long it
takes to automatically log out a
user when the machine is left idle.
Settings
OFF
Mode1
Mode2
No administrator
password is set at
shipment.
No protect passcode is
set at shipment.
1-10 minutes:
3 minutes
Reference page
Chapter 4, "PIN
masking" in
"Security fax
functions" in the
Scanner and Fax
Guide.
2-5
2-7
2-39