Searching - Lowrance AirMap 2000C Operation Instructions Manual

4. To accept the default name "Data" for the GPS Data File, press ↓ to
| . (If you wish to rename the file, press
S ENT
AVE
lection box. Press ↑ or ↓ to change the first character, then press → to
the next character and repeat until the name is correct. Then, press
|↓ to
ENT S
AVE
The unit will display first a progress then a completion message when
the data transfer is finished. To return to the Page view, press
| |
EXIT EXIT EXIT

Searching

In this example, we'll look for the nearest hotel or motel. For more in-
formation on different types of searches, refer to Sec. 6, Searching.
NOTE:
This example requires the Point of Interest (POI) database included
with MapCreate 6. Always use a custom map if you want to be able
to search for Points of Interest.
After AirMap has acquired a position:
1. Press |↓ to
FIND
2. You could search the entire lodging category, but in this example we
will narrow our search. Subcategory is listed below the main selection
list. Press → to
3. AirMap says it is calculating, then a list of hotels and motels ap-
pears, with the closest at the top of the list, and the farthest at the bot-
tom of the list. The nearest is highlighted.
Find Map Places Menu, left; Category Selection menu, center;
| .)
ENT
.
M P
AP LACES
H /M
OTELS OTELS
and list of the nearest motels, right.
| |↓ to
ENT POI-L
| | .
ENT ENT
72
to activate the se-
ENT
.
ODGING