Sec. 3: Aviation Operation; Keypad - Lowrance AirMap 2000C Operation Instructions Manual

Section 3:
Aviation Operation
This section addresses AirMap's main aviation GPS functions. The
principles are the same in both operating modes, so this discussion also
serves as a good introduction to Land Mode work.
Before you turn on the AirMap and find where you are, it's a good idea
to learn about the different keys, the three Page screens and how they
all work together. BUT, if you just can't wait to get outside, grab the
batteries and turn to the one-page Quick Reference on page 39.

Keypad

7
6
3
2
4
5
1
8 9
AirMap 2000 keypad.
1. PWR/LIGHT (Power & Light) – The PWR key turns the unit on and
off and activates the backlight.
2. PAGES – Pressing this key and the arrow keys will switch the unit
between the three different page screens in Aviation Mode. (Satellite,
Navigation and Map.) Each page represents one of the unit's major
modes of operation.
3. MENU – Press this key to show the menus, which allow you to select
or adjust a feature from a list.
4. ARROW KEYS – These keys are used to navigate through the
menus, make menu selections, move the chart cursor and enter data.
5. ENT/SAVE (Enter & Save) – This key allows you to save data, to
accept values or to execute menu commands. Also use it to quickly cre-
ate waypoints or icons.
6. EXIT – The Exit key lets you return to the previous screen, clear
data or erase (clear) a menu.
19