Trail Options; Update Active Trail Option; Update Trail Criteria (Auto, Time, Distance) - Lowrance AirMap 2000C Operation Instructions Manual

Trail Options

There are several options you can use with trails. Some affect all trails,
other options can be applied to a particular trail. You can change the
way trails are updated, you can display or hide trails, make them flash
on the screen or not flash, create a new trail, delete a trail, etc.
General Trail Options
To access the Trails Menu:
1. Press
MENU
Main Menu, left, Trails Menu, center, Trail Options, right.
Delete All Trails
To remove all of the trails from memory: from the Trails Menu, press →
to |
D A ENT
ELETE LL

Update Active Trail Option

This menu lets you change the way the trail updates occur.
WARNING:
If you uncheck the Update Active Trail option, automatic trail crea-
tion and recording will be turned off, and you must turn it back on
to record trails. The default setting is on.
Press ↓ or ↑ to
to check it (turn on) and uncheck it (turn off).
ENT

Update Trail Criteria (Auto, Time, Distance)

The options are automatic, time, or distance. When it's in the default
automatic mode, the unit doesn't update the plot trail while you're
traveling in a straight line. Once you deviate from a straight line, the
unit "drops" a plot point (trail waypoint) onto the trail. This conserves
plot trail points. If a plot trail uses all of the available points allotted to
it, the beginning points are taken away and placed at the end of the trail.
| |↓ to
MENU M
|← to |
Y
ES
U A
PDATE CTIVE
| |→ to
T ENT
Y RAILS
.
ENT
. With the option highlighted, press
T
RAIL
104
| .
O ENT
PTIONS