Navigation Page - Lowrance GlobalMap 4000M Operation Instructions Manual

Mapping gps receiver
Hide thumbs Also See for GlobalMap 4000M:
Table of Contents

Advertisement

Navigation Page

This screen has a compass rose that not only shows your direction of
travel, but also the direction to a recalled waypoint. To get to the Navi-
gation Page: Press
The navigation screen looks like the one below when you're not navi-
gating to a waypoint or following a route or trail. Your position is
shown by an arrow in the center of the screen. Your trail history, or
path you've just taken, is depicted by the line extending from the arrow.
The arrow pointing down at the top of the compass rose indicates the cur-
rent track (direction of travel) you are taking.
Track or compass heading indicator, showing direction of travel
Navigation
information
displays
Trail line
Navigation Page, recording a trail, traveling east. Page looks like
this when the unit is not navigating to a waypoint , following
When navigating to a waypoint, the Navigation screen looks like the
following figure. Your ground speed, track, distance and bearing to
waypoint, and course are all shown digitally on this screen.
NOTE:
Remember, when the Speed, Track and Position information dis-
plays are flashing, satellite lock has not been achieved and no posi-
tion fix has been determined. A question mark will also flash on the
present position arrow in the center of the compass rose.
Speed (ground speed) is the velocity you are making over the ground. (If
you wish, you can customize the Speed window to display Closing
| → or ← to
PAGES
a route, or backtracking a trail.
|
N
AVIGATION
26
.
EXIT
Compass
rose
Present
position
arrow

Advertisement

Table of Contents
loading

Table of Contents