Chapter 4. Attaching To A Hewlett-Packard Alphaserver Tru64 Unix Host; Attaching To An Hp Alphaserver Tru64 Unix Host System With Fibre-Channel Adapters; Supported Fibre-Channel Adapters For The Hp Alphaserver Tru64 Unix Host System; Supported Operating System Levels For Fibre-Channel Attachment To An Hp Tru64 Unix Host - IBM TotalStorage DS6000 Attachment Manual

Host systems attachment guide
Hide thumbs Also See for TotalStorage DS6000:
Table of Contents

Advertisement

Chapter 4. Attaching to a Hewlett-Packard AlphaServer Tru64
UNIX host
This chapter describes how to attach a Hewlett-Packard (HP) AlphaServer Tru64
UNIX host to a storage unit.
Attaching to an HP AlphaServer Tru64 UNIX host system with
fibre-channel adapters
This section describes the host system requirements and provides the procedures
to attach a storage unit to an HP AlphaServer with fibre-channel adapters.
Supported fibre-channel adapters for the HP AlphaServer Tru64 UNIX
host system
This section lists the fibre-channel adapters that are supported for storage unit
attachment to an HP AlphaServer Tru64 UNIX host system.
You can attach a storage unit to an HP AlphaServer Tru64 UNIX host system with
the following fibre-channel adapters:
v KGPSA-CA adapter card
v KGPSA-DA adapter card
v KGPSA-EA adapter card
Note: You do not need the Subsystem Device Driver because Tru64 UNIX
For information about adapters that you can use to attach the storage unit to the
HP host and the HP AlphaServer models, see the Interoperability Matrix at
http://www.ibm.com/servers/storage/disk/ds6000/interop.html.
Supported operating system levels for fibre-channel attachment to an
HP Tru64 UNIX host
This section lists the supported operating system levels for storage unit
fibre-channel attachment to an HP AlphaServer Tru64 UNIX host system.
You can attach a clustered HP AlphaServer Tru64 host system with level 5.0A, 5.1,
5.1A, and 5.1B with the following topologies:
v Switched fabric
v Point-to-point

Fibre-channel Tru64 UNIX attachment requirements

This section lists the attachment requirements to attach a storage unit to a Tru64
UNIX host system with fibre-channel adapters.
You must comply with the following requirements when attaching the storage unit to
your host system:
v Ensure that you can reference the documentation for your host system and the
© Copyright IBM Corp. 2004, 2005
manages multipathing.
IBM TotalStorage DS6000 Information Center that is integrated with the IBM
TotalStorage DS Storage Manager.
27

Advertisement

Table of Contents
loading

Table of Contents