Wireless Lan - Toshiba WT8PE-B User Manual

Problem
No display
Display error occurs

Wireless LAN

Problem
Cannot access
Wireless LAN
User's Manual
Procedure
Try adjusting the contrast and brightness controls
on the external monitor.
Change the display priority and ensure that it is not
set for the internal display only.
Check to see if the external monitor is connected.
When the external monitor is set as the primary
display device in extended desktop mode, it does
not display when the computer wakes up from
Sleep Mode if the external monitor has been
disconnected while in Sleep Mode.
To keep this from happening, do not disconnect
the external monitor while the computer is in Sleep
or Hibernation Mode.
Remember to turn off the computer before
disconnecting the external monitor.
When the display panel and an external monitor
are set to clone mode and they are turned off by
the timer, the display panel or the external monitor
might not display when turned on again.
Check that the cable connecting the external
monitor to the computer is firmly attached.
If you are still unable to resolve the problem,
contact TOSHIBA Support.
Procedure
Make sure that the wireless communication
function of the computer is on.
If problems persist, contact your LAN
administrator.
6-9