External Monitor; Wireless Lan - Toshiba AT1S0 User Manual

External monitor

Please also refer to the documentation supplied with your monitor for
further information.
Problem
Monitor does not turn on After confirming that the monitor's power switch is
No display
Display error occurs

Wireless LAN

If the following procedures do not restore LAN access, consult your LAN
administrator.
Problem
Cannot access Wireless
LAN
Bluetooth
Problem
Cannot access
Bluetooth device
User's Manual
Procedure
on, you should check the connections to make
sure that the power cord/adaptor is firmly
connected to the monitor and to a working power
outlet.
Try adjusting the contrast and brightness controls
on the external monitor.
Check that the cable connecting the external
monitor to the tablet is firmly attached.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
Procedure
Make sure the tablet's Wireless communication
functionality is set to on.
If problems persist, contact your LAN
administrator.
Procedure
Check to ensure the tablet's Bluetooth
functionality is set to on in Apps → Settings →
Bluetooth.
Troubleshooting
72