3D Playback On An External 3D Device - Toshiba WT8PE-B User Manual

Product appearance depends on the model you purchased.

3D Playback on an External 3D Device

3D playback on an external 3D device feature is only provided with
TOSHIBA WT10PE-A models.
Effect of 3D can be shown only on an external 3D devices connected via
an HDMI output. It cannot be shown on the internal display. In order for 3D
playback to work on external display/TV, you need a 3D enabled display
TV that has an HDCP compliant HDMI port.
3D playback feature supports the following resolutions:1920x1080 24 Hz
and 1280x720 60 Hz.
Change the Screen Resolution to one of the above before using 3D
playback function.
Important Safety Information for 3D Function
User's Manual
Figure 4-8 Replacing the pen tip
Do not continue to use a broken pen tip as this could result in
scratching of the display screen. When the pen tip breaks, replace it
with the refill delivered with the Stylus Pen. When these refills have
run out, you can purchase a new pen set from a TOSHIBA authorized
dealer.
Always use the refills delivered with the Stylus Pen. Use of an
incompatible refill could cause a malfunction or characteristic
deterioration.
A short and worn pen tip is difficult to pull out. Replace the pen tip with
a refill before it becomes too short to remove.
It is recommended that you keep another pen set as a spare. You can
buy replacement pen sets from your TOSHIBA authorized dealer.
Refrain from or stop viewing if you feel ill or experience discomfort
before or while watching 3D video images.
Refrain from viewing 3D video images if you experience convulsions,
photosensitivity reaction, or heart disease.
4-8