Sound System; Wireless Lan - Toshiba AT10LE-A Series User Manual

Problem
You cannot read a
file
USB device
In addition to the information in this section, please also refer to the
documentation supplied with your USB device.
Problem
USB device does not
work

Sound system

In addition to the information in this section, please also refer to the
documentation supplied with your audio device.
Problem
No sound is heard
Recorded sound
volume is low
Recorded sound
quality is not good
Recorded sound is
not stereo

Wireless LAN

If the following procedures do not restore LAN access, consult your LAN
administrator.
User's Manual
Procedure
Check to ensure the required file is actually on the
memory media card that is inserted into the tablet.
If you are still unable to resolve the problem,
contact TOSHIBA Support.
Procedure
Remove the USB device from the convert cable
and reconnect it to ensure it is firmly attached.
Procedure
Adjust the volume.
Check the software volume settings.
Check to see if system sound is muted.
Check to make sure the headphone connection is
secure.
Disable Toshiba Noise Suppressor setting.
Disable Toshiba Beamforming setting.
Disable Toshiba Noise Suppressor setting.
Disable Toshiba Beamforming setting.
Check the application supports stereo recording.
Disable Toshiba Beamforming setting.
8-3