Konica Minolta 7115 Service Manual page 186

Hide thumbs Also See for 7115:
Table of Contents

Advertisement

No.
Name
1
PRINT
2
JOB STORE
3
COUNTER
4
REVERSE IMAGE
5
ORIGINAL
6
COMBINATION
7
MARGINE ERASE
8
OUTPUT
9
IMAGE SHIFT
10 X/Y ZOOM
11 JOB RECALL
12 BYPASS TRAY SIZE
SELECT
13 ZOOM
14 DISPLAY
15 KEYPAD
16 ID
17 POWER SAVE
18 INTERRUPT
19 AUTO RESET
20 CLEAR
21 STOP
22 START
Description
Lit while data received from personal computer is being
printed
Press to select the Job Input mode. Two different jobs can
be programmed.
Press to display the Total Counter or Size Counter value.
Press to copy an original with the original total arrange-
ments reversed.
Press to select the Mixed Orig. or Book Separation func-
tion.
Press to select the 2in1 or 4in1 function.
Press to select the erase position.
Press to select the finishing function.
Press to select the Image Shift mode.
Press to make a copy with different zoom ratios set for
X (horizontal) and Y (vertical) directions.
Press to recall either one of the two jobs previously stored
in memory.
Press to select the size of the paper loaded in the Bypass
Tray.
• Press to change the zoom ratio in the range between
50 % and 200 % in 1 % increments.
• What is shown on the Display changes from the number
of copies to be made to the zoom ratio.
Shows the number of copies to be made, the zoom ratio,
and other setting data.
Use to type in the number of copies to be made and any
other numeric data.
• Press when entering an account number.
• Becomes valid only when Copy Track has been set.
Press to set the copies into the Energy Saver mode.
Press to interrupt a copy job.
• Press to reset all copy functions and settings to their
defaults.
• Holding down the key for 3 seconds or more will set the
copies into the Utility mode.
Press to reset the number of copies to "1".
• Press to stop a print cycle.
• Press to stop a scanning sequence.
• Press to start a scanning sequence.
• Press to start a print cycle.
• Press to validate the setting just made.
• The key lights up green when the copier is ready to make
copies, orange when it is not ready to make copies.
S-2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7118

Table of Contents