Miscellaneous; Remounting The Eeprom (U29 - Konica Minolta 7115 Service Manual

4-6.

MISCELLANEOUS

(1)

Remounting the EEPROM (U29)

NOTE
• When the Control Board (PWB-C) is replaced with a new one, EEPROM (U29) must be
demounted from the old PWB-C and remounted on the new PWB-C.
Remove the EEPROM (U29) from the new Control Board and mount the EEPROM (U29) of
the old Control Board to the new Control Board.
New EEPROM
New Control Board
A
A
1171D049AA
Old EEPROM
Old Control Board
NOTE
• Note the alignment notch marked with A on the
EEPROM (U29) when mounting the IC.
D-68
4022D031AA