On-Screen Display - Lorex LW2100 Instruction Manual

On-Screen Display

1. Signal Indicator – The signal indicator
shows the strength of the signal being
received from the camera.
The number of bars in the Signal Indicator
shows the strength of the signal – One or No
Bars indicates the signal is poor, and 4 bars
indicate a very strong signal.
NOTE: Signal Indicator not shown while
in Quad Mode.
ATTENTION: If signal is low (e.g. 1 or 2
bars) adjust the antennas, or reposition
the cameras or receiver for best
performance.
Optional high power antennas are
available to extend the range of the
wireless signal or help the signal get
around solid objects. For more details, see page
17 of this manual, or visit
go to Wireless Products Solutions.
2. Channel Indicator – Displays the current channel
number. Press the CHANNEL button on the Receiver
to switch between available cameras.
NOTE: Channel Indicator not shown while in Quad
Mode.
CH 1 CH 2
CH 4
CH 3
3. Status Indicator – The Status indicator message
"Connecting" appears when the receiver is trying to
locate a camera.
NOTE: There may be temporary signal losses
for less than 1 second, due to the connection
retrieval process between the Camera and
Receiver (when switching between channels).
This is a normal operation of the receiver.
www.lorexcctv.com and
On-Screen Display
1 2
Figure 4.0 On-screen display
Figure 4.1 Quad split-screen view
3
Figure 4.2 Connecting message
13