Adjusting The Sound - Loewe R 37 Full-HD+ 100, R 37 HD+ 100 Operating Instructions Manual

Daily operation

Adjusting the sound

Switching sound off/on
Sound off;
Sound on: Press button again or set volume V+.
Setting the volume
V+/V– Volume louder / quieter.
The volume bar will be shown briefly if no other menu
is displayed.
Setting the sound mode
Call Sound mode.
Sound mode
optimal
3 4 S elect the number of speakers you want to hear.
Additional sound settings for volume adjustment and for Sound mode:
➠ A s long as you can still see the volume bar or the
selection of speakers for sound mode:
 Call additional sound settings.
Volume
24
3 4 S elect sound setting,
6 go to the menu line below.
3 4 M ake changes.
Sound settings via the TV menu
➠ In normal TV mode, without other displays.
Call TV menu.
34 S elect Sound,
6 go to the menu line below.
3 4 S elect desired sound setting,
6 go to the menu line below.
3 4 M ake changes.
- 20
...
(5) 4 3 2 1
Sound mode DPLII mode Sound adjustment
Explanations of the sound settings:
Sound mode Select the number of speakers you want to hear. The
selection depends on the connected sound components
(from page 47) and on the transmitted audio signal.
➠ If the number of speakers appears in brackets, the
sound of missing speakers is transmitted by the existing
speakers (virtual).
optimal The momentarily reproduced audio signal is output with
the ideal number of speakers.
1
Play centre sound or mono (left/right).
2
Play front sound (L/R stereo).
3
Play front and centre sound.
4
Play front and surround sound.
5
Play front, surround and centre sound.
Amplifier Play via an external HiFi amplifier. Selection is only possible
if an amplifier has been selected in the sound components
wizard (see page 52).
Sound Speech, Classical, Pop, Custom music, and Custom film
adjustment sound.
Headphone vol. Adjust the headphones volume.
Loudness
Proper boost of bass and treble tones at low volume.
Dolby PLII Here you can make Dolby Pro Logic II sound settings for
mode movie, music, matrix and personal settings. Menu item
only appears with certain sound mode settings.
more ... Call with OK.
Loudspeaker/
Selection possibility Mono/Stereo or Sound 1 or Sound
Headphone 2 for two-sound broadcasts separately for speakers and
END
sound headphones. Only available for analogue stations.
Headphone volume
Auto Volume Reduces volume differences, e.g. for advertisements that
are too loud.
AV output
Sound selection for two-sound broadcasts.
signal
Maximum Determining the maximum volume that can be set.
volume
Switch on Specify the volume that is set when switching on the TV
volume set with the mains switch.
If the volume when switching off the TV set into standby
mode is higher than specified here, it is automatically
reduced to the fixed switch-on volume when switching
back on.
Volume The volume can differ according to the individual stations.
adjustment for If the sound is too loud or too quiet in relation to other
current station stations, adjust the volume. When the menu is open, you
can select the stations one after another with P+/P– and
adjust every single station conveniently.
Balance Set stereo balance so that the volume impression is identical
on the left and right.