Operating Additional Equipment; Connecting Recorders - Loewe Xelos A 22 Operating Instructions Manual

Operating additional equipment

Connecting recorders

1. Connect your antenna or cable connection to the recorder (1).
2. Connect the recorder to the Euro-AV sockets on the TV set if
possible (2).
3. Connect the antenna output of the recorder to the antenna input
of the TV set (3). The antenna signal is then available to both the
tuner in the recorder and in the TV set.
3
32172_XelosA22_GB
RFin
AV1/TV
RFout
AV2/Dec
19
Log in the device
1. Call the TV menu.
2. Select "Connections".
3. Select the free connection (AV1, AV2 or AVS).
4. Select the device type you want to connect and its signal type in
the connection wizard, e.g. "VHS/8 mm....VCR" for video
recorder.
5. Confirm with OK.
6. Select the colour standard of the auxiliary equipment. Select
"automatic" if you do not know what it is.
7. Confirm with OK.
Search for and store the station of the recorder (if no Euro AV
cable is available)
Switch on the test station on the recorder or insert a recorded
medium and start playback. In some video recorders the station must
be switched on by activating the modulator.
Call the channel overview with the OK button. Select the menu item
"VIDEO" and call with OK.
To prevent "normal" TV stations being found in the search, pull out
the antenna plug from the antenna input of the recorder temporarily
(the cable to the antenna system).
If you cannot see the test station or playback from the medium, the
recorder is transmitting on a different channel. You then have to
search for the stationor set it manually.
1. Call the TV menu with the MENU button.
2
2. Select the „Settings" menu item.
3. Select the line below it with
4. Select the line below with
this menu with OK.
5. Enter channel "E30" under the "Channel" item (UHF range,
select in this menu above if necessary).
1
6. Start search with the blue button.
7. If the station has been found, save with the red button.
8. A list of the stored stations is displayed.
9. Select 0 (VIDEO) here and overwrite this program place with the
red button.
10. Hide the menu again with the MENU button.
11. Plug the antenna plug back in.
If you now get interference because a TV station is transmitting on
the same channel as the recorder, you have to change the
transmitting station on the recorder and search for the recorder
station on the TV again.
03.05.2005, 9:27 Uhr
and "Programmes".
and "Manual settings" and call
19