Using The Accessories; Big Brush; Window Wiper - Vax VCST-01 User Manual

Steam cleaner and vacuum
Hide thumbs Also See for VCST-01:
Table of Contents

Advertisement

The attachments can be directly connected to the handgrip (23) or,
depending on your needs, to the extension tubes (2)
Fitting the attachments: fit completely until the lower hooking
lever (30) is hooked
Disconnecting the attachments: press and release the lower
hooking lever (30) and pull out the attachment
CAUTION! Make sure it is properly fastened by pulling it slightly.
CAUTION! Never separate the attachments when steam is coming
out; you could burn yourself.

BIG BRUSH (3)

The big brush is provided with an articulated connection, wheels,
steam diffuser and a suction unit. Three different fittings can be
attached to it:
carpet fitting (4)
floor fitting (5)
liquid fitting (6)
To assemble the fitting:
Move the top slides outwards (picture 19)
Turn the big brush (3) upside down
Fit the required fitting and make sure it is properly oriented (the
wide part must face forward) (picture 20)
Fasten the fitting by moving the two top slides inwards (picture 21)
picture 19
picture 20

USING THE ACCESSORIES

8
picture 21

WINDOW WIPER (13)

CAUTION! Excessive temperature differences between the glass
window and the steam can break the window.
With extreme outside temperatures, preheat the window with steam
at a distance of about 30-50 cm.
Then spray the steam all over the surface of the glass to compensate
the temperature differences and to avoid stressing the glass surface.
USE
picture
22
Use the window wiper to wipe the surface
starting from the top downwards
Slightly press the window wiper sponge
against window to remove dirt
To dry, vacuum the surface by putting the
window wiper rubber squeegee against it
For slightly dirty surfaces, use both steam
and vacuum at the same time
WARNING:
To avoid dripping, complete the steam delivery and continue to vacuum
for a few moments in order to allow the vacuumed liquid to go up the
suction ducts.
After each cleaning operation, clean the window wiper rubber strip with a
clean cloth. Proper window cleaning, with no lines, will be guaranteed
only if a clean and outstretched strip is used.
10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents