Height Adjustment Of The Hot Wedge - Pfaff 8304-020 Instruction Manual

Adjustment
12

Height adjustment of the hot wedge

.04.02
● Adjust stop 1 (screw 2) according to requirement 1.
● Loosen screw 3 and adjust tension spring in heat-sealing part 4, so that hinge 5 just rests
● Adjust hinge 5 (screws 6) according to requirement 2.
12 - 5
Requirement
1. When the hot wedge has been swung into position, the tip of hot wedge 7 should be
positioned a distance above the bottom feed roller equivalent to the thickness of the
workpiece.
2. Hinges 5 should be in a horizontal position.
Fig. 12 - 04
lightly on stop 1.
5
4
2
1
7
6
3