Installation and commissioning
8
Switching the machine on/off
.03
● Set main switch 3 at position "1".
● In addition, on machines with hot air, turn regulator 1, until the hot air pressure shown on
8 - 3
2
1
Fig. 8 - 03
gauge 2, is at least 0.2 bar.
The hot-air pressure must not drop below 0.2 bar!
If the hot-air pressure is too low, there is a risk of the heating rod burning out.
The heating therefore switches off automatically when the hot-air pressure is
too low.
Fig. 8 - 04
3