Care and maintenance
11
Care and maintenance
11
Cleaning
.01
11
Machines with hot wedge
.01.01
● Before each use remove any burnt residues from the top and bottom side of the hot
11
Machines with hot-air nozzle
.01.02
● Remove any residues from the air slot of hot-air nozzle as required.
11 - 1
Clean hot wedge .............................................................................................. as required
Clean hot-air nozzle .......................................................................................... as required
Grind hot wedge .............................................................. as required, usually one a week
Control the air pressure ........................................................................... daily, before use
Clean water bowl of air filter/regulator .................................................... daily, before use
Clean water bowl of fine filter ................................................................. daily, before use
Change fine filter ............................................................................................. once a year
Lubricate drive chains ...................................................................................... as required
Switch off the machine and let it cool down!
Danger of burns if the hot wedge is touched!
wedge with a soft, brass wire brush.
Switch off the machine and let it cool down!
Danger of burns if the hot-air nozzle is touched!