TAKING CARE OF UNEXPECTED PROBLEMS
Snow not discharging properly
Possible cause
Auger spinning too slowly.
Wet, deep snow is difficult to
blow.
Belt worn, not on pulleys or not
properly installed.
Snow blower moving too fast for
snow conditions.
Engine stalls when auger clutch lever is depressed
Possible cause
Engine running too slow.
Discharge chute restricted.
Foreign object stopping auger
from rotating.
Auger frozen by ice.
Correction
Keep throttle in FAST position
(page 14).
Reduce snow blowing swath or
speed.
See servicing Honda snow
blower dealer.
Use shift lever to reduce ground
speed (page 17).
Correction
Keep throttle in FAST position
when engaging auger clutch
(page 16).
Clear discharge chute or auger
housing of obstruction.
69