Honda HSS928A Owner's Manual page 57

4.After adjusting, raise the auger off the ground and then slowly lower
and make sure both skid shoes contact the ground at the same time.
Auger clearance:
Ordinary snow conditions
Smooth, ice-covered surfaces
Rough or uneven surfaces
Operation on rough or uneven surfaces with less than the
recommended auger ground clearance can damage the snow blower.
5.Check the scraper ground clearance and readjust if necessary.
Retighten the nuts and bolts.
Scraper Ground Clearance
AUGER:
5/32–5/16 in
(4.0–8.0 mm)
Adjust the scraper equally on both sides so it runs parallel with the
ground. Be sure to tighten the scraper bolts after making adjustments.
TORQUE: 20 ft-lb (26.5 N•m)
SERVICING YOUR SNOW BLOWER
AUGER
SCRAPER:
3/32–5/32 in
(2.0–4.0 mm)
5/32–5/16 in (4.0–8.0 mm)
0–3/16 in (0–5.0 mm)
1–1-3/16 in (25.0–30.0 mm)
3/32–5/32 in (2.0–4.0 mm)
SKID
(AW, AWD)
SCRAPER
SKID
(AT, ATD)
55