Transporting; Before Loading - Honda HSS928A Owner's Manual

BEFORE LOADING

1.Loading the snow blower on a trailer should be performed on a firm,
level surface.
2.Use a loading ramp that is strong enough to support the combined
weight of the snow blower and the operator:
Weight of snow blower: (Operating weight)
Types
AT
ATD
AW
AWD
3.The loading ramp must be long enough so that
its slope is 15° (26%) or less.
Length of
Ramp (L)
Height (H)
4.If the truck bed has a low roof or cover, with less than 5 ft (1.5 m)
of headroom, lower the discharge deflector for better clearance, or
remove the chute assembly.
5.Check that there is sufficient fuel in the tank. The engine may stall
on the ramp if there is not enough fuel in the tank.
64
Models
276 lbs (125 kg)
287 lbs (130 kg)
243 lbs (110 kg)
254 lbs (115 kg)
8.2 ft
(2.5 m) (3.0 m)
2.1 ft
(65 cm) (75 cm)
HSS928A
9.8 ft 11.5 ft
(3.5 m)
2.5 ft 3.0 ft
(90 cm)

TRANSPORTING

HSS1332A
287 lbs (130 kg)
309 lbs (140 kg)
—
—
L
H