Honda HSS928A Owner's Manual page 64

STORAGE
3.To remove the battery, remove the battery strap from the bottom
hook.
4.Connect the battery charger positive (+) cable to the battery
positive (+) terminal and then connect the battery charger negative
(–) cable to the battery negative (–) terminal.
5.Charge the battery: 5–10 hours at 1.2 A (HSS928A).
6.Install the battery in the reverse order of removal.
7.Install the battery cover by holding the bottom of the grommet and
firmly squeezing the front side of the cover to engage each pin into
the grommets
8.
This symbol on the battery means that this product must not
be treated as household waste.
NOTE:
An improperly disposed of battery can be harmful to the environment
and human health. Always confirm local regulations for battery
disposal.
Fuse Replacement
Rotate the fuse holder cover and pull the fuse out. Replace if blown
with a fuse of the same type and rating.
HSS1332 (ATD)
62
5–10 hours at 1.8 A (HSS1332A).
FUSE (5 A)
FUSE HOLDER COVER
HSS928A (AWD, ATD)