Report Print Out - Kyocera KM-3035 Operation Manual

Section 6 COPIER MANAGEMENT FUNCTIONS

7. Report print out

Perform the following procedure to print out one of the following
reports.
< Copy report >
Lists all of the values for the copy default settings.
< Machine report >
Lists all of the values for the machine default settings.
< Toner coverage report>
Lists the average toner density (black ratio) for each size of copy
paper used under each of the copy, printer and fax functions of this
machine.
NOTE
Make sure that 11" x 8 " [A4] size paper is loaded in one of the
1/2
drawers[cassettes].
1 With the content of the "Basic" tab displayed, press the
[Default Setting/Counter] key.
The "Default setting" screen will be displayed.
2 Touch the "Print report" key.
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
6-52
Language Management
Bypass BOX Counter
setting Management check
Register Print User
orig. size report Adjustment
Language Management
Bypass Hard Disk Counter
setting Management check
Register Print User
orig. size report Adjustment
3 Use the keypad to enter the 4-digit management code.
The factory default setting for 30 cpm copiers is "3000", for
40 cpm copiers is "4000" and for 50 cpm copiers is "5000".
Inch specifications
Enter the administrator number
Metric specifications
Enter the administrator number
Once the "Print report menu" screen is displayed, touch the
4
"Copy report" key, the "Machine report" key or the "Toner
coverage" key, as appropriate.
Inch specifications
Print report
Print report menu
Copy
report
Machine
report
Default setting
Metric specifications
Print report
Print report menu
End
Copy
report
Machine
report
Default setting
End
Toner
coverage
Toner
coverage
Close
Close
Close
Close